language
中国
韩国
韩国
韩国
韩国
韩国
NEWS CENTER
/
/
/
The 48th CIFF(Shanghai)

The 48th CIFF(Shanghai)

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-10-29
  • Views:

(Summary description)

The 48th CIFF(Shanghai)

(Summary description)

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-10-29 10:31
  • Views:
Information

Scan the QR code to read on your phone

Other News

HF Vacuum Dryer manufacturers take you to understand the advantages of high frequency vacuum drying and other drying methods
HF Vacuum Dryer manufacturers take you to understand the advantages of high frequency vacuum drying and other drying methods
The HF Vacuum Dryer manufacturer tells you that the combination of high-frequency drying and vacuum state mainly uses the lower boiling point of water in the vacuum state, which can ensure that the wood volatilizes moisture and achieves the drying effect. The HF Vacuum Dryer manufacturer tells you that the traditional wood drying process, When the temperature is too high, it will cause wood cracking; and our vacuum drying process can effectively control this situation and reduce the drying loss of wood.


The following HF Vacuum Dryer manufacturers analyze the advantages of high-frequency vacuum drying and other drying methods:
Compared to traditional wood drying methods:
Mainly heat conduction drying (such as steam drying kiln, hot air circulation drying kiln, etc.) is relatively inefficient, because heat conduction drying is heated on the surface, and the heat is slowly transferred to the core, which means that the surface temperature for a long time. High, the core temperature is lower, which is the opposite of high-frequency heating. As we all know, the thermal conductivity of wood is low, so the drying time is longer. At the same time, another defect brought about is that the surface temperature of the wood is finally high, and the surface is excessively high. Drying, the HF Vacuum Dryer manufacturer tells you that these two points will cause cracking on the surface of the wood, and due to the uneven characteristics of heat conduction, it will also lead to changes in the stress of the wood and the problem of bending and deformation of the wood.
Compared to microwave drying:
Microwave is an electric field with a higher frequency than high frequency. As mentioned earlier, the higher the frequency, the faster the heating speed, and the shallower the heating, so microwave drying is more suitable for drying thinner boards or wood, HF Vacuum Dryer manufacturer told Because the microwave heating speed is fast, the surface of thick wood will be quickly heated, and the microwave electric field is difficult to radiate to the wood core, so poor control can easily lead to surface cracking or even surface carbonization or burning.
Compared with ordinary vacuum drying:
HF Vacuum Dryer manufacturers tell you that conventional vacuum drying mainly adopts the heating method of hot plate, that is, the wood is placed in the middle of the hot plate, and the hot plate is hollowed with heat-conducting oil or steam hot water. It can ensure that the wood is dried at a lower temperature, However, this drying method is still heat conduction heating, which still cannot ensure that the thick wood will not crack or deform during the drying process.
More
The HF Vacuum Dryer manufacturer tells you that the combination of high-frequency drying and vacuum state mainly uses the lower boiling point of water in the vacuum state, which can ensure that the wood volatilizes moisture and achieves the drying effect. The HF Vacuum Dryer manufacturer tells you that the traditional wood drying process, When the temperature is too high, it will cause wood cracking; and our vacuum drying process can effectively control this situation and reduce the drying loss of wood.


The following HF Vacuum Dryer manufacturers analyze the advantages of high-frequency vacuum drying and other drying methods:
Compared to traditional wood drying methods:
Mainly heat conduction drying (such as steam drying kiln, hot air circulation drying kiln, etc.) is relatively inefficient, because heat conduction drying is heated on the surface, and the heat is slowly transferred to the core, which means that the surface temperature for a long time. High, the core temperature is lower, which is the opposite of high-frequency heating. As we all know, the thermal conductivity of wood is low, so the drying time is longer. At the same time, another defect brought about is that the surface temperature of the wood is finally high, and the surface is excessively high. Drying, the HF Vacuum Dryer manufacturer tells you that these two points will cause cracking on the surface of the wood, and due to the uneven characteristics of heat conduction, it will also lead to changes in the stress of the wood and the problem of bending and deformation of the wood.
Compared to microwave drying:
Microwave is an electric field with a higher frequency than high frequency. As mentioned earlier, the higher the frequency, the faster the heating speed, and the shallower the heating, so microwave drying is more suitable for drying thinner boards or wood, HF Vacuum Dryer manufacturer told Because the microwave heating speed is fast, the surface of thick wood will be quickly heated, and the microwave electric field is difficult to radiate to the wood core, so poor control can easily lead to surface cracking or even surface carbonization or burning.
Compared with ordinary vacuum drying:
HF Vacuum Dryer manufacturers tell you that conventional vacuum drying mainly adopts the heating method of hot plate, that is, the wood is placed in the middle of the hot plate, and the hot plate is hollowed with heat-conducting oil or steam hot water. It can ensure that the wood is dried at a lower temperature, However, this drying method is still heat conduction heating, which still cannot ensure that the thick wood will not crack or deform during the drying process.
What are the characteristics of HF Vacuum Dryer products
What are the characteristics of HF Vacuum Dryer products
HF Vacuum Dryer is a combined drying method of high frequency medium heating and vacuum low temperature drying. HF Vacuum Dryer is a relatively fast drying method with low waste rate and is suitable for all woods.
More
HF Vacuum Dryer is a combined drying method of high frequency medium heating and vacuum low temperature drying. HF Vacuum Dryer is a relatively fast drying method with low waste rate and is suitable for all woods.
How to achieve efficient improvement of large-format solid wood panel structure
How to achieve efficient improvement of large-format solid wood panel structure
JYC high-frequency board splicing machine series can be described as the leader of high-frequency technology.
The board splicing machine has high efficiency and each board only needs to be heated for 60-180 seconds, compared with the traditional board splicing machine.
The flatness and yield is higher.
More
JYC high-frequency board splicing machine series can be described as the leader of high-frequency technology.
The board splicing machine has high efficiency and each board only needs to be heated for 60-180 seconds, compared with the traditional board splicing machine.
The flatness and yield is higher.
The 48th CIFF(Shanghai)
The 48th CIFF(Shanghai)
timer : 2021-10-29
More

 

 

Friendly link:    HF WOOD VACUUM DRYER MACHINE |

Search

Copyright 2021 © Foshan Jiyuan High Frequency Equipment Co., LTD  All Rights  粤ICP备19154461号

Online Inquiry

Product information

* Please select the HF/RF woodworking machinery you want to consult *
Product serial number
Thumbnail
Name of product
Retail price
Expected unit price
*Order quantity
Operation

Contact information

Basic information
Method of contact and profession
Company information
yzm

Add product X

Product categories:
All products
Selected 0 Each