BLOGS
Belarus-High Frequency Wood Board Joining Machine
When a customer places a repeat order, that tells you more than any spec sheet ever could.
A woodworking facility in Belarus had already been running one of our JYC HF thin board joining machines on their production line. They liked what it did — so they came back and ordered two more machines: another thin board joining machine and a standard HF wood panel joining machine.

What They're Running
HF Thin Board Joining machine — 4 mm oak, 60 seconds.
Four-millimeter oak is tricky. It warps, it bows, it fights back. But on the JYC thin board joining machine, the HF glue joining cures in 60 seconds flat — before the wood has time to misbehave. No clamps, no waiting, high flatness.

Standard Panel Joining machine — 25 mm and 40 mm, under 3 minutes.
For their thicker stock, the standard JYC HF wood board joining machine handles 25 mm and 40 mm panels in under 3 minutes per cycle. Same HF principle: heating only to the glue, fast cure, clean joint.

Why This Matters
High frequency = high efficiency. HF curing heats only for the glue line, setting the bond in seconds instead of hours. No more waiting around for cold-press cycles or pre-heating hot plates
One standard HF wood board joining machine wide application range. From 8 mm furniture panels to 250 mm structural boards — same machine, same fast cycle, no hassle
Flat panels, less sanding, lower cost. HF pressure + rapid cure means panels come out flat with minimal stress. Less sanding waste, less material lost, real cost savings downstream
They didn't need convincing. They'd already lived with the first machine and chose to buy again!
Other News
Fully Automatic Shaker Cabinet Door Assembly Line: From Manual Assembly to Smart Manufacturing
timer :
2026-10-07
Mid-Autumn Festival at JYC: Warm Hearts, One Home
timer :
2026-09-24